MY-144 Laboratory Salt Spray Testing Machine, Corrosion Test Chamber with PID Temperature Control

MY-144 Laboratory Salt Spray Testing Machine, Corrosion Test Chamber with PID Temperature Control

Product Description

The Salt Spray Combined Climate Tester is to test: If surface of different material can adopt the corrosion resistance, as well as changes in temperature and humidity after the plating, anodic treatment, spraying, anti-rust oil and other anti-corrosion treatment. This machine is designed to test the influence of salt pollution that might accelerate the corrosion on the metal material outdoors. The device contains the circulation of the sample to the salt fog, dry, hot and humid environment test method.

Product Alias

Salt Spray Corrosion Test Chamber / Salt Fog Tester / Brine Spray Test Machine / NSS Salt Spray Tester / Salt Spray Aging Test Cabinet / Metal Corrosion Resistance Testing Chamber

Features

1.Automatic / manual water system has automatically add the water level of the water level is low, the test is not interrupted. Water level is insufficient warning to ensure that the use of safety.
2.Precision glass nozzle (PYREX) made of special glass, mist spread evenly and naturally fall on the specimen, and 4000 hours of continuous use, and to ensure that no crystalline salt obstruction.
3.Attached double over-temperature protection, over-temperature warning display, and cut off the heater power to ensure that the use of safety.
4.Inlet temperature controller using a digital display, PID control, error of ± 0.1 ° C.Laboratory using direct steam heating, heating up fast, and even reduce the standby time, heating tubes with high corrosion-resistant titanium tubing.
5.Spray tower attached to the conical dispersion, with oriented fog, the function of regulating the amount of fog and uniform loading amount of fog.
6.The saturated air barrel using Henry's law, be heated humidification, and provide the required humidity of the laboratory. Its made of SUS # 304 stainless steel insulation effect, with visual connectivity and drainage switch, in order to visually saturated air the barrel water level and cleaning.
7.With automatic defogging device that can clearly watch the specimen in test chamber.
8.Fog sealing sink, water seal to prevent fogging leakage.
9.Laboratory sealing cover material for Taiwan imported PVC board, pneumatic cylinder automatic lifting way, easy to operate safe and reliable.
10.The import timer using digital display, accurate timekeeping, H. M. seconds S can be segmented set any required test time, adjust the time range from 0.01 seconds to 9999 hours. * Reagent supplement bottles hidden attached water level viewing window, easy to clean and should not be broken.
11.Laboratory basket rack using plane indexing rack, can arbitrarily adjust the angle, four off the fog, and the fog direction completely consistent.

Product Parameters

Application Scenarios

FAQ

Question 1: Weak or no salt mist output during test
Customer: The chamber powers on and runs normally, but salt mist output is very low or there is no spray at all. What causes this issue?
Manufacturer: First check the brine liquid level inside the salt water tank, insufficient solution will reduce spray volume. Inspect the atomizing nozzle; salt crystal accumulation often blocks the nozzle, clean it with warm distilled water. Verify the air pressure regulator is adjusted to the standard working pressure and check all air pipelines for air leakage. Only use distilled water to prepare salt solution, tap‑water will produce impurities and block components. Restart equipment after troubleshooting. If the problem remains, please contact our technical support team.
Question 2: Cannot reach the set test temperature
Customer: The heating indicator is on, yet the inner chamber temperature cannot reach preset test temperature and keeps deviating.
Manufacturer: Ensure the test chamber cover is fully closed and latched tightly, hot air leakage will affect temperature rising. Keep equipment away from cold air flow and direct cold wind. Check whether the door sealing gasket is aged, deformed or stuck with debris, which will cause heat loss. Confirm heating function is not manually disabled. You can perform temperature offset calibration in control menu. Do not open the inner cabinet without permission, contact support if deviation still exists.
Question 3: Machine triggers alarm and stops operation suddenly
Customer: During long‑duration corrosion test, the equipment gives alarm signal and stops running automatically.
Manufacturer: Check liquid level of brine tank and pressure tank; low liquid level will trigger safety protection alarm. Confirm waste liquid overflow pipeline is smooth without clogging. Check input power supply for unstable voltage. Cut off power and restart the chamber. If alarm occurs repeatedly after reboot, record alarm indicator status and take on‑site photos, send information to our technical staff, do not disassemble internal components.
Question 4: Brine leaks from chamber door or pipeline joints
Customer: Salt water leaks from the gap of chamber lid or connection pipe fittings during operation.
Manufacturer: Power off the machine and terminate the test before inspection. Check whether chamber cover is completely locked. Examine door sealing gasket for aging, crack or foreign object jam. Tighten all brine pipe joints properly. Replace damaged sealing parts in time. Do not continue running with leakage, leaked salt solution may corrode machine shell and electrical parts.
Question 5: Heavy salt crystal residue builds up inside test chamber
Customer: After several test cycles, a large amount of salt crystal deposits stick to inner wall, nozzle and pipelines.
Manufacturer: Drain all waste salt solution immediately after finishing each test. Clean inner chamber, nozzle and pipelines with distilled water. Do not leave brine staying inside chamber for long idle period. Use qualified pure sodium chloride reagent for solution preparation, impure salt will generate more crystalline residue. Regular cleaning can avoid nozzle blockage and extend equipment service life.
Question 6: Shipping Method
Customer: If we place an order, how do you typically ship the goods? Will there be any issues with transporting bulky items such as reactors?
Manufacturer: We default to using dedicated logistics lines or brand-specific express shipping services; small-sized main units and accessories may also be shipped via standard courier services. Large items, such as reactors and excitation transformers, are packed using wooden crates or wooden frames for reinforcement to prevent bumps and moisture exposure during transit; a packing list is included with each package to facilitate item-by-item counting for you. Logistics costs are typically determined by both parties in accordance with the contract terms; after shipment, we will send you both the tracking number and the carrier's contact phone number for easy tracking.If your project site is remote or if delivery to the site is required with a specified logistics company, please inform us in advance when placing your order; we can then coordinate and arrange accordingly.
Question 7: Delivery Lead Time
Customer: Our project is under tight deadlines; how long will it take for the order to be shipped after we place it? Can we request expedited shipping?
Manufacturer: Standard specifications – stock available; typically delivered upon receipt of the order. Orders can be shipped within [X] working days; for non-standard products requiring customized voltage levels, capacities, or reactor combination configurations, the production cycle typically ranges from [X] to [Y] days.The delivery time will be approximately 7-15 working days; the specific timeline shall be subject to the sales confirmation provided upon order placement. If your project has a tight schedule, please inform us of the latest expected delivery date before placing your order; we will first verify the production schedule and inventory status, and where possible, will coordinate expedited production and prioritize shipment. However, it is recommended to allocate sufficient transit time for logistics to avoid delaying on-site testing.
Question 8: After-sales Service and Warranty
Customer: What is the warranty period for this equipment? If any issues arise during on-site use, how will your after-sales service respond?
Manufacturer: We provide a two-year free warranty on the entire unit and lifelong technical support services. During the warranty period, if issues arise due to defects in the equipment itself, we will provide free repair or replacement of components; when problems occur on-site, we commit to responding within 24 hours; most wiring and parameter configuration issues can be resolved through remote guidance via video or telephone; for cases where an on-site visit is necessary, we will arrange for our technicians to arrive at the location to resolve the issue. After the warranty period expires, we still offer repair services, with spare parts supplied at cost price for the long term, and software updates provided free of charge for life. Upon delivery of the equipment, we also offer free operational training (video operation guides)to ensure that your testing personnel can operate the equipment independently and proficiently; should you have any further questions, please feel free to contact our dedicated after-sales hotline directly.
Question 9: Shipping methods for each region (Sea freight)
Customer: Our projects are distributed across several states, and our procurement volumes are substantial; are the shipping methods consistent across all states? How is the delivery time calculated?
Manufacturer: The specifications are identical; however, it should be specifically noted that this equipment set is large in size and heavy in weight—components such as the reactor and excitation transformer are all classified as heavy components. Therefore, regardless of which state or region the shipment is destined for, we will uniformly utilize sea freight transportation. The packaging employs export-grade wooden crates with reinforced structures, along with moisture-proof and rust-proof treatments; the design of these wooden crates is optimized for long-distance sea transport and multiple lifting and transshipment operations. Upon arrival at the destination, simply unpack the goods and conduct an inspection before putting them into use. Regarding delivery time, the sea freight transit period depends on the port of destination: near-sea routes are generally faster, whereas ocean routes may take longer; the exact number of days will be confirmed based on the shipping schedule specified in the bill of lading. We have a dedicated freight forwarding agency to handle booking of shipping space, customs declaration, insurance, and other related procedures; once the vessel departs, we will send you documents such as the bill of lading and the packing list, enabling you to arrange for the receipt of goods at the port of destination and their inland transshipment in advance

Shipping scenario

Scene (One)

Scene (Two)

Attachment Directory

Attachment Image